Manufacturing Engineer (热处理工程师）
宝长年钻探装备（无锡）有限公司
- 公司规模：150-500人
- 公司性质：外资(欧美)
- 公司行业：机械/设备/重工
职位信息
- 发布日期：2013-07-18
- 工作地点：无锡
- 招聘人数：1
- 工作经验：五年以上
- 学历要求：本科
- 语言要求：英语熟练
- 职位类别：其他 产品工艺/制程工程师
职位描述
职位描述
1.Process Control: Supervise and control process, quality and operation in suitable condition.
2.Process Audit: Perform audit for all processes of Coring Rods production lines.
3.Process optimizing: Review process related document and cooperate with production line to take improvement action to Optimize process and improve productivity.
4.Training: Provide guidelines and training for all operators/Technicians/Engineers. Perform sample check and provide statistical data.
5.Failure Analysis/Yield reporting: Conduct failure analysis to remove the root cause of defect, analysis yield lost for improvement. Continuously yield monitoring and reporting.
6.Safety Improvement: Identify safety weakness and take preventative actions and compile related safety work instruction.
7.Technical support: Be responsible for Product/process drawing confirmation, process flow design, program coordination, new fixtures design, gauge calibration support, support line capacity improvement and lean manufacturing(layout) and tooling coordination.
8.Material Science: Do metallographic analysis after heat treatment, support new products material science.
9.Reporting: Prepare and submit monthly status reports to engineering manager.
10.Quality: Demonstrate commitment to quality, and implement quality management system and its related requirements.
11.EHS: Demonstrate commitment to EHS, and implement EHS policies, procedures and legislative requirement, which can refer to AP EHS-10 for more.
任职要求
1.Bachelors degree or above, major in mechanical engineering, etc.
2.At least 5 years related working experience in a manufacturing foreign company.
1.Process Control: Supervise and control process, quality and operation in suitable condition.
2.Process Audit: Perform audit for all processes of Coring Rods production lines.
3.Process optimizing: Review process related document and cooperate with production line to take improvement action to Optimize process and improve productivity.
4.Training: Provide guidelines and training for all operators/Technicians/Engineers. Perform sample check and provide statistical data.
5.Failure Analysis/Yield reporting: Conduct failure analysis to remove the root cause of defect, analysis yield lost for improvement. Continuously yield monitoring and reporting.
6.Safety Improvement: Identify safety weakness and take preventative actions and compile related safety work instruction.
7.Technical support: Be responsible for Product/process drawing confirmation, process flow design, program coordination, new fixtures design, gauge calibration support, support line capacity improvement and lean manufacturing(layout) and tooling coordination.
8.Material Science: Do metallographic analysis after heat treatment, support new products material science.
9.Reporting: Prepare and submit monthly status reports to engineering manager.
10.Quality: Demonstrate commitment to quality, and implement quality management system and its related requirements.
11.EHS: Demonstrate commitment to EHS, and implement EHS policies, procedures and legislative requirement, which can refer to AP EHS-10 for more.
任职要求
1.Bachelors degree or above, major in mechanical engineering, etc.
2.At least 5 years related working experience in a manufacturing foreign company.
3.CET-4 / CET-6 holder, good at both of speaking and writing.
4.Integrity.
5.Positive.
6.Good team player and communication skill.
7.Good learning and problem solving ability.
4.Integrity.
5.Positive.
6.Good team player and communication skill.
7.Good learning and problem solving ability.
公司介绍
宝长年集团总部位于美国盐湖城，由分别创建于1936年的Boart公司和1893年Longyear公司在1973年合并后发展至今，目前业务广泛分布在世界上30多个国家和地区，年收入达数十亿美元。作为一家钻探和凿岩装备的专业制造商和钻探服务商，宝长年正在不断拓展制造和服务领域。宝长年在勘探和采掘等领域中一直处于世界领先地位，并在全球钻探行业内享有崇高的声望。
宝长年钻探装备（无锡）有限公司，由宝长年集团投资设立，是一家专业生产和销售钻探工具及设备的美国独资企业。公司成立于1996年8月，位于无锡高新技术产业开发区宝德工业园内。公司主要生产钎具和岩芯产品，包括系列钎头、钎尾、连接套、潜孔钎头和岩芯钻杆等，而且能够为全球的客户提供一套完整的凿岩装备服务。公司的产品被广泛就用于矿山、铁路、水电、核电、建筑等能源和基础建设领域。
作为宝长年集团重要的制造、销售和服务厂商，我们坚持：
经营方针——不求最大，但求最好
经营准则——安全和利润同样重要
质量目标——稳定可靠、始终如一
秉承上述经营理念，并依托宝长年集团雄厚的技术力量、品牌声誉以及广阔的市场前景和客户资源，宝长年钻探装备（无锡）有限公司正在加大投资力度，通过不断引进国内外先进的技术、设备和管理模式，持续完善工作和生活条件，吸引优秀人才共同开拓事业，以追求客户价值最大化为目标，为中国及全球客户提供技术先进、质量可靠的产品和服务体验。随着公司规模的不断扩大，公司诚聘所述人员，欢迎有志之士加入我们这个优秀的团队。公司详细信息请见网站www.boartlongyear.com。
宝长年钻探装备（无锡）有限公司，由宝长年集团投资设立，是一家专业生产和销售钻探工具及设备的美国独资企业。公司成立于1996年8月，位于无锡高新技术产业开发区宝德工业园内。公司主要生产钎具和岩芯产品，包括系列钎头、钎尾、连接套、潜孔钎头和岩芯钻杆等，而且能够为全球的客户提供一套完整的凿岩装备服务。公司的产品被广泛就用于矿山、铁路、水电、核电、建筑等能源和基础建设领域。
作为宝长年集团重要的制造、销售和服务厂商，我们坚持：
经营方针——不求最大，但求最好
经营准则——安全和利润同样重要
质量目标——稳定可靠、始终如一
秉承上述经营理念，并依托宝长年集团雄厚的技术力量、品牌声誉以及广阔的市场前景和客户资源，宝长年钻探装备（无锡）有限公司正在加大投资力度，通过不断引进国内外先进的技术、设备和管理模式，持续完善工作和生活条件，吸引优秀人才共同开拓事业，以追求客户价值最大化为目标，为中国及全球客户提供技术先进、质量可靠的产品和服务体验。随着公司规模的不断扩大，公司诚聘所述人员，欢迎有志之士加入我们这个优秀的团队。公司详细信息请见网站www.boartlongyear.com。
联系方式
- 公司地址：上班地址：无锡新区新梅路55号宝德工业园内